A telescopic water-fed cleaning brush is for work from the ground: solar / PV modules, high windows, roof covering, facades and billboards. This guide covers the specs, how water reaches the head, and when the tool is a fit.
It is a telescopic pole with a wide brush head that water is fed into. Cleaning is done from below: the bristles scrub and the water rinses. It is not a pressure washer, not a steam cleaner and not a window vac that collects water from glass.
The point is to reach a higher surface without a ladder where the pole length is enough. That does not mean a ladder is never needed: if you cannot reach the object or the work is unsafe from the ground, this tool is not a substitute for working at height.
Data for the kit we hand over. This is specification, not a price list.
Once connected to a tap, water runs through the hose and the pole to the brush head. The head wets the surface and the bristles scrub. You set flow with the regulator: too much wastes water, too little rinses weakly.
The kit includes a tap connector, adapters, a T-splitter and a rotary joint. You set the angle to a roof pitch, a window or a panel position.
Water feed is not a high-pressure jet. This tool does not wash like a pressure washer and does not collect water like a window vac.
It suits hard outdoor surfaces you can reach with the telescopic pole and scrub with water. Solar / PV modules are the main use. The result depends on the type of dirt, the amount of water and whether the panels are safely reachable from the ground.
The same logic applies to high windows, roof covering, facades and billboards: if the pole is enough and the surface allows gentle scrubbing with water. It is not for fabrics, sofas or a car interior.
The kit is for assembling the pole, connecting water and carrying it. Below is what is handed over, not a price list.
Without a tap the brush does not work as a water-fed cleaning tool. Start with a shorter pole — the maximum 7 m is not the first step for every job.
This tool is water scrubbing from the ground. It is the wrong job for a sofa or car interior (you need extraction), for indoor streak-free glass (a window vac), or for a terrace and paving (pressure). Without a tap it also does not work as a water-fed brush.
If you cannot reach the object with a 7 m pole, or the work needs a ladder and working at height, the telescopic brush is not a substitute. Do not use abrasives that are not in the kit.
The telescopic pole lets you clean from below without a ladder in some situations. That is a practical plus for home PV and high windows, but not a universal safety promise for every roof.
The bristles are elastic and meant for gentle scrubbing with water. Panels are cleaned from the ground when pole length and angle are enough. Do not use a pressure jet or abrasives. If modules on a roof are not safely reachable, this tool is not a substitute for working at height.
High windows suit the brush when you can reach them from below. A window vac is still better for indoor streak-free glass. For roof and facade — only if the surface can be scrubbed with water and reached with the pole.
This page is a tool guide. If you want to try the telescopic brush in practice, go to the rental page.
We come to you and carry out the chemical cleaning - no work required on your part.
140–700 cm (1.4–7 m). The pole is 8 × 100 cm aluminium sections. Maximum length is not the default for every job — choose only as much as you need to reach.
Yes. Once connected to a tap, water runs to the head — you can wet and scrub at the same time. This is not a high-pressure jet.
Yes — that is the main use. The bristles are elastic and meant for gentle scrubbing with water. The result depends on the type of dirt and whether the panels are reachable from the ground.
Yes, if you can reach them with the telescopic pole from below. For indoor streak-free glass a window vac is a better fit.
Yes, when you can reach the surface with the pole and scrub it with water. If you need a ladder or work at height, this tool is not a substitute.
2 brush heads, 8 extension sections, seals, quick adapters, holders, tap connector, T-splitter, flow regulator, rotary joint, hose and a carry bag.
Yes — the kit includes a tap connector and adapters for a standard outdoor tap.
The telescopic brush scrubs with water from the ground. A window vac collects water from glass and is for a streak-free finish. They are different tools.
No. You need a water tap. Without a water source the brush does not work as a water-fed cleaning tool.
Call 062 110 999 - we will advise whether rental or a service is the better option.
Before you leave
Message us on WhatsApp — we reply in ~5 min. Pre-filled message with your choice.
Message us on WhatsApp — we reply in ~5 min. Pre-filled message with your choice.
Ask on WhatsApp